Stretch wrapping machine controller
1)Include inverter & PLC. function.
2)max 4 motor drive control(T/T,Head,Film,Top)
Price Terms:FOB,CIF,EXW
Payment Terms: T/T,Western Union,MoneyGram,L/C
Minimum Order: Negotiatable
Delivery Port: Customized
Contact Supplier
Semi Pallet Warpping Machine Controller
(stretch wrapping machine controller)
www.chirontech.co.kr
Merits
Cost Down | 1.Multi(max 4 unit) Drive Inverter function Included 2.High Speed CPU(DSP 32Bits Processor) 3.PLC No Required(System Sequence Included) 4.Simple Power Circuit and Control Cuicuit 5.Simplified internal Panel Design(No Inverters & PLC) | Function 1.Turn table 2.Head up down 3.Film tension 4.Top sheet |
Saving Time | 1.Molex Connector Type 2.No Require Wiring Connection Between Inverter and PLC | |
Performance | 1.Safe and Simple Sequence by one Processor 2.Product Differentiation |
Specfications
Item | Specification | Remark | |
Power Source | 1 Phase 200~220[VAC], 50~60[Hz] 3 Phase 380~440[VAC], 50~60[Hz] | ||
Output | 1 or 3 Phase 200~220[VAC] Selectable 1 or 3 Phase 380~440[VAC] Selectable | Max. 1[Hp] | |
Demension | Controller Part | 157mm(W)*240mm(D)*85mm(H) | |
Input(6Pin) | 1,2 | Input 1 | Internal Short |
3,4 | Input 2 | ,, | |
5,6 | For Earth | ,, | |
Sensor Input (20Pin) | 1 | 12~24VDC Output for External Sensors | |
2,3 | Ground of 12~24VDC | Internal Short | |
5 | Start Command Input | ||
6 | Stop Command Input | ||
7 | Turn Table Dec. Start(Not Use) | Option | |
8 | Turn Table Stop Sensor Input | ||
9 | Head Down Limit Sensor Input | ||
10 | Head Up Limit Sensor Input | ||
11 | Head Photo(for Product Sensing) Sensor Input | ||
13-15 | Film tension Sensor(24VDC) Input | 3 Motor Type | |
Output | J2 | Turn Table Motor Drive Output | 2 Motor Type |
J3 | Head up doun Motor Drive Output | 2 Motor Type | |
J4 | Film tension Motor Drive Output | 3 Motor Type | |
J5 | Top sheet Motor Drive Output | 4 Motor Type | |
Control (86 function) | Speed Command Setting | Analog(Volume)/Digital(keypad pre-set) Selectable | |
Aec. Dec. Pattern | Linear/S-Curve Selectable | ||
Protections | OC,OV,UV… | ||
Cooling | Internal Heat-sink(No Cooling Pan) | ||
Braking | Internal Resistor(External Resistor is Option) | ||
Option | Membrane Sheet for operating Cable Assembly (Between Controller and Sensor) | ||
Auto Mode Wrapping Sequence (Selectable) | 1 | Down Winding ->Up Winding ->Down | |
2 | Down Winding ->Up Winding ->Stop | ||
3 | Up Winding -> Down Winding ->Stop | ||
4 | Down Winding ->Up & Down Stop ->(Top Sheet Action) ->Up ->Up Winding ->Down ->Stop | ||
5 | User Define | ||
Manual Mode | Turn Table | On,Off(Rotating speed variable) | 2 Motor Type |
Head | Up,Down(speed variable) | ,, | |
Film Tention | On,Off(Tension Speed Variable) | 3 Motor Type | |
Top sheet | 4 Motor Type | ||
www.chirontech.co.kr |